How to adjust SEV Marchal cassette points

In the 1970’s French company S.E.V. Marchal brought out a new type of ignition with the traditional points built into a cassette. This made removal and fitting must faster and easier, but you could no longer set the points gap with a feeler gauge. A dwell meter must be used instead. Most garages would have had a dwell meter for accurate setting of standard points so this would not have been a problem, however for the DIY owner used to setting points with a feeler gauge (or “eyecrometer”) it posed a problem. From the enquiries we’ve getting, it seems this still poses a problem, even for professional garages. Many garages now do not even have staff who know how a traditional points based ignition system works, let alone have equipment for checking and setting the system. And it’s not really surprising seeing as most vehicle manufacturers had changed over to electronic ignition systems by the early 1980’s.

Just as modern vehicle technology has rendered most DIY vehicle maintenance obsolete or impossible on today’s cars, the modern garage can no longer properly cater for vehicles made before 1980. This is where specialist garages like us are invaluable. We know how your car works and how to repair / adjust and service it using the correct parts and grades of oil. We can also help DIY owners and modern garages with information about maintaining the older vehicle, the information sheet below on how to set cassette points being case in point, if you’ll pardon the pun.

Instruction sheet : SEV Cassette points

BUY Cassette points


SEV Marchal cassette points


BUY condenser for cassette points


Condenser for cassette points

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s